The nozzle is an important part of the hotend of a 3D printer, on which many factors of high-quality extrusion and good adhesion of layers depend. It is through the nozzle that the filament melted in the hotend is squeezed out for further application on the 3D printing platform and the creation of three-dimensional parts.
The Phaetus Tungsten Carbide Nozzle PS (V6) is the same ideal nozzle for all filaments. From ordinary PLA to special high-temperature plastics and even abrasive filaments reinforced with carbon and fiberglass — the original nozzle from the Phaetus brand will provide quality printing results of any complexity with the right settings of your 3D printer. The tungsten carbide nozzle has a very high wear resistance and therefore will serve for a long time and reliably.
The nozzle is treated with a special DLC coating, the coefficient of surface friction of which is only 0.05, and ensures clean printing without plastic sticking. The thickness of the coating is 2.0 μm, which does not affect the dimensional accuracy at all. DLC coating has stable chemical properties, it is non-toxic, non-corrosive and insoluble in other solvents.
Advantages:
- Excellent wear resistance
- Ultra high hardness > 2700-2900Hv
- Long-lasting printing without wearing out the nozzle hole
- High temperature performance
- High thermal conductivity
- Extrusion stability due to high thermal efficiency and uniform nozzle temperature during printing
- Ultra high speed without sacrificing quality
Main characteristics:
- Material of the nozzle leg: copper alloy
- Material of the nozzle tip: tungsten carbide
- Hardness: 9.8 Mohs
- Maximum printing temperature: 550 ℃
- Thermal conductivity: 130 W/m·k
- Coefficient of expansion: 4.0 μm/m·℃
- Roughness of the inner hole: ≤Ra0.2μm
- Concentricity: 0.02 mm
- Permissible size error: ±0.01 mm
The Phaetus Tungsten Carbide Nozzle PS (V6) is compatible with:
- The entire range of VORON 3D printers
- The entire range of Prusa 3D printers
- The entire range of Rat Rig 3D printers
- The entire range of FYSETC 3D printers
- The entire range of FLYING BEAR 3D printers
- The entire range of SOVOL 3D printers
Important: Currently, 3D printer manufacturers are improving their designs and changing nozzle models, offering their own solutions, because of which the nozzle may not fit specifically for your printer, so we recommend consulting with our manager to select the correct nozzle for your 3D printer.
